ATEX LED emergency light non-maintained 3W 200lm IP65
Protect escape routes in explosive zones with the ATEX LED emergency light non-maintained 3W. 200 lm, IP65 and 2h autonomy. Certified for zones 1, 2, 21 and 22. Buy now at Icilux.
The ATEX LED emergency light non-maintained 3W stays off and lights up with 200 lm for 2 hours when the power fails, with IP65 protection and certification for zones 1, 2, 21 and 22.
Benefits of the ATEX LED Non-Maintained Emergency Light 3W
- ATEX, CE and RoHS certification for zones 1, 2, 21 and 22.
- It only switches on in an emergency, with 2h autonomy.
- 200 lm with SMD LED at 6000K.
- IP65 protection against dust and water.
- Aluminium and tempered glass.
Where to install the ATEX LED Non-Maintained Emergency Light 3W
Ideal for refineries, chemical plants, warehouses and escape routes in classified zones with no need for continuous light.
Technology and performance of the ATEX LED Non-Maintained Emergency Light 3W
Its internal battery only kicks in when the supply drops, which extends its service life. It runs on 180-240V with a 0.95 power factor, a 120° beam and a 50,000 hour lifespan, from -20°C to +40°C.
Installation of the ATEX LED Non-Maintained Emergency Light 3W
It mounts on a wall or ceiling through cable glands, with a 7 mm minimum cable not included. Installation by qualified staff; switch off the power and check the seal before handling it.
Icilux distributes it in Spain with warranty and technical support; shipping in 24-48h subject to availability.
Frequently asked questions
What does non-maintained mean? — It stays off and lights up only if the power fails.
How long does the battery last? — 2 hours in emergency mode.
Is the cable included? — No, it needs a cable of at least 7 mm diameter.