Surface Mounted LED Ceiling Lights: Ceiling Lighting Without Building Work

Surface mounted LED ceiling lights illuminate any room without the need for a false ceiling, because the surface mounted non recessed fitting screws directly onto the slab and is ready in a matter of minutes.

Why the surface mounted ceiling light is the most versatile solution

An aluminium surface mounted LED ceiling light dissipates heat better and extends the service life of the LED fitting, while the white or stainless steel finish blends in without clashing in homes and offices.

Non recessed and with no building work yet a professional result

There is no need to open up the ceiling or hire anyone, and the uniform lumen distribution avoids the shadow areas left by isolated spotlights. Compared with other ceiling lamps, the fitting spreads homogeneous ambient light from a single light point.

The Osram chip surface mounted LED ceiling light keeps its colour stable over the years thanks to the quality of the Osram Duris chip, something generic models lose quickly. As solid state light sources, these units run on 220-240V AC voltage and offer energy efficiency far superior to that of halogens.

Available formats round square and with sensor

The round 12W surface mounted LED ceiling light is the best seller for corridors and bedrooms, while the square 20W LED ceiling light fits better in living rooms with straight lines. Among the types of ceiling lights available, the round one remains the most common in the home.

An LED ceiling light with motion sensor incorporates a built in motion sensor and proves very practical in entrance halls, garages and communal areas where the light should not stay on.

Selectable CCT and dimmable ceiling lights

The selectable CCT temperature allows you to switch from warm to neutral with a switch, so the selectable colour CCT LED ceiling light avoids having to decide the tone at the time of purchase, and lets you choose between warm white, neutral and cool white depending on how the room is used.

A dimmable LED ceiling light works with a phase cut dimmer, and the LED ceiling light with remote control adds intensity regulation and colour control without touching the wall.

IP44 models for bathroom and outdoor use

The IP44 rating for bathroom and outdoor use protects against splashes, so an IP44 LED ceiling light for the bathroom can be installed above the shower without risk.

The indoor outdoor LED ceiling light works equally well on a porch or on a covered terrace.

How to choose the right ceiling light for each space

Recommended wattage diameter and colour temperature by area

The available diameters range from 17 to 40 centimetres, and the practical benchmark is to allow around 100 lumens per square metre in circulation areas. The type of light should be matched to the amount of natural light each room receives.

The LED ceiling light for corridors is resolved with low wattages, the LED ceiling light for the kitchen ceiling benefits from a neutral tone, the LED ceiling light for the living room calls for warm light and the surface mounted LED ceiling light for offices works better at 4000K.

The price to quality ratio of an LED ceiling light depends above all on the chip and the driver, not on the size of the outer ring. In kitchens and technical areas cool light proves more practical, while the living room benefits from a warm tone.

To complete the installation, take a look at the LED wall lights or the LED pendant lamps.

Frequently asked questions about surface mounted LED ceiling lights

What is the difference between a ceiling light and a recessed downlight?

The ceiling light is mounted on the ceiling with screws and needs no opening, while the downlight is recessed and requires a false ceiling with sufficient depth.

Can LED ceiling lights be installed in bathrooms?

Only those declaring an IP44 rating or higher, which withstand splashes and condensation and can be placed outside the protection zone of the bathtub.

What wattage of ceiling light do I need for a 20m2 living room?

Between 24 and 36 watts as general lighting, a figure worth splitting across two points if the room is long and narrow.

Are LED ceiling lights dimmable?

Those fitted with a dimmable driver accept phase cut dimming, and some models include a remote control with intensity adjustment.

What does CCT mean on an LED ceiling light?

It is the correlated colour temperature, and on selectable models it allows you to choose between warm, neutral and cool on the unit itself.

Do ceiling lights with a motion sensor work indoors and outdoors?

Indoors they always work, and outdoors only models with a suitable IP rating, which additionally adjust the on time and the sensitivity.