Professional LED Controllers and Dimmers: Total Control over Your Lighting
LED electronic components determine how an installation responds to user commands. Without the correct control component, a high-performance strip operates at 100% at all times with no possibility of adjustment. As European leaders in lighting, we have experts at your service to help you choose the right solution.
Why light control is key in LED installations
Controlling light is part of electrical design. A system without dimming consumes the same energy at any time of day and cannot adapt if the project evolves. LED control electronic components resolve this from day one. We are a leading online store in the distribution of lighting systems with a guaranteed price.
Energy savings with intelligent dimming
PWM dimming adjusts the power delivered to the strip without any loss of efficiency. Reducing intensity to 50% cuts consumption proportionally. Strip lifespan increases when strips habitually operate below their maximum rated power.
Visual comfort and adaptation to space usage
A well-sized control zone allows colour temperature or intensity to be changed according to the activity. This requires a dimmable LED-compatible device with the appropriate protocol for each space.
Types of LED controllers
Single-channel controller for basic LED strips
The mini single-channel LED strip controller manages single-channel strips with PWM dimming. The maximum output current in amps varies by model. Consult the compatibility table to choose the correct unit for the length of your installation.
CCT controller for adjustable colour temperature
The CCT LED controller with remote control regulates two channels to blend warm white and cool white. The CCT LED controller with remote control regulates two channels at 12 V and 24 V.
RGB and RGBW controller for colour installations
The RGB LED controller 12V 24V manages three colour channels. The RGBW LED controller RF 2.4GHz adds a fourth white channel. Both accept RF remote control for LED strips and infrared remote control depending on the model.
| Model | Channels | Voltage | Max. current per channel | Protocol |
|---|---|---|---|---|
| Mini single-channel | 1 | 12/24 V | 8 A | PWM / RF |
| CCT remote control | 2 | 12/24 V | 6 A x channel | RF 2.4GHz |
| RGB 12V 24V | 3 | 12/24 V | 4 A x channel | RF 2.4GHz |
| RGBW RF 2.4GHz | 4 | 12/24 V | 4 A x channel | RF 2.4GHz |
| 4-zone RF | 4 zones | 12/24 V | 5 A x zone | RF 2.4GHz |
The 4-zone RF LED controller manages four independent circuits from a single remote control. The LED wall touch control panel replaces the physical remote in installations where aesthetic finish matters.
Compatible dimming systems
RF 2.4GHz: wireless control without a hub
The RF 2.4GHz protocol works without a gateway or router. It is the fastest option to install in residential and commercial premises without home automation infrastructure. At the forefront of wireless control technology, the typical range exceeds 30 metres in open space.
1-10V: the standard in professional installations
The universal 1-10V LED dimmer accepts a control signal from any system generating between 1 and 10 volts. The DALI 1-10V signal coexists with this system in many mixed installations in office buildings and large retail spaces.
DALI: maximum control in intelligent buildings
The DALI protocol assigns an individual address to each luminaire. The 1-10V to DALI signal converter connects existing analogue dimmers to DALI networks without replacing the wiring. Required in projects with BREEAM or LEED certification.
Integrated sensors and detectors
Surface-mount PIR sensor for corridors and access points
The slim LED motion sensor installs on the surface without any building work. The 180-degree motion detector covers corridors, staircases and access points with a range of 8 to 12 metres. The PIR radar sensor provides reliable detection in spaces with variable temperature conditions.
Radar detector: greater precision and range
The radar detector detects movement through non-metallic materials without requiring a direct line of sight. Suitable for warehouses, car parks and industrial environments. Both models allow adjustment of delay time and lux level.
The 10kV LED surge protector and the mains surge protection device protect the entire installation against transients. With new LED solutions continuously added to the catalogue, the team of experts at your service selects components with the best cost-to-protection ratio. For the LED controller with mobile app, Bluetooth configuration requires no physical remote control.
Also see the LED strips and LED power supplies categories. The triac dimmer 220V LED dimmer and the triac 1000W LED dimmer are the correct option when the LED load connects directly to 220 V.
We offer personalised customer service, credit payment and full after-sales service terms. Receiving the product in perfect condition and maintaining its correct operation are part of our service. As a lighting professional, we apply expert methods at your service so that the fastest-growing retailer in the sector becomes your go-to purchasing reference.
Frequently asked questions about LED electronic components
What controller do I need for RGB LED strips?
You need an RGB LED controller 12V 24V with three output channels. Check that the output current in amps is sufficient for the total installed length. If the strip exceeds 5 metres, use at least 4 A per channel.
What is the difference between 1-10V and DALI dimming?
The 1-10V signal is analogue and controls all connected equipment simultaneously. The DALI protocol is digital, assigns individual addresses and supports scenes, groups and fault diagnostics.
Can I control my LED strips from my mobile phone?
Yes. The LED controller with mobile app manages colour, intensity and scenes from a smartphone. Verify that the strip is dimmable LED-compatible and that the power supply delivers the correct voltage.
Does a triac dimmer work with any dimmable LED bulb?
The triac 1000W LED dimmer works with LED loads that incorporate a triac-dimmable driver. Check in the technical datasheet that the product states "dimmable" and the compatible minimum load range.
How do I know whether my LED strip is compatible with a specific controller?
Check the working voltage, number of channels and total current of the strip. LED strip compatibility is guaranteed when the strip current remains below the maximum output current of the equipment.
What is a 1-10V to DALI signal converter used for?
The 1-10V to DALI signal converter translates the analogue signal into the digital DALI protocol. It allows DALI drivers to be integrated into installations with control systems that only generate a 1-10V signal, without replacing the existing wiring.