Industrial LED High Bays for Warehouses and Storage Facilities: Maximum Efficiency at Great Heights
Industrial LED lighting now sets the standards for consumption and maintenance in warehouses, storage facilities, and logistics centres. Industrial LED high bays with an LED light source reduce electricity costs by between 50% and 70%.
Their service life is also considerably longer. Check the data sheets to verify wattage and compatibility.
What an industrial LED high bay is and when to use it
An industrial LED high bay is a high-output LED luminaire for mounting on high ceilings. Its UFO format concentrates luminous output in lumens with high luminous efficiency. It is used where LED lighting for high-ceiling warehouses must provide uniform illumination of between 200 and 500 lux. Visual comfort during extended shifts depends on a well-calculated light distribution.
Highbay vs lowbay: installation based on ceiling height
The term industrial highbay refers to units for warehouse mounting heights above 8 metres. Below that, the lowbay offers better photometric distribution at lower wattages. Fitting an LED highbay in an industrial warehouse with a low ceiling causes glare and unnecessary consumption.
Advantages over traditional discharge lamps
Replacing high-pressure discharge lamps with a high-output LED lamp eliminates hot restarts and periodic lamp maintenance. Current LED luminaires reach 200 lm/W efficiency.
They also have a power factor above 0.95. By comparison, sodium vapour or metal halide achieves between 80 and 110 lm/W. The ROI in B2B projects falls between 12 and 18 months.
Available wattages and their application
The luminous output and luminous performance of the model determine the number of units a project requires. These lighting solutions cover everything from 5-metre warehouses to large industrial heights:
| Mounting height (m) | Recommended wattage | Approx. area per unit |
| 5 - 8 m | 80W - 100W | 30 - 50 m² |
| 8 - 12 m | 100W - 150W | 50 - 80 m² |
| 12 - 16 m | 150W - 200W | 80 - 120 m² |
| > 16 m | 200W + reflector | > 120 m² |
80W to 150W LED high bays for standard warehouses
The 150W UFO industrial LED high bay is the most in-demand format for picking warehouses with ceiling heights of 8 to 10 metres. Its luminous intensity guarantees the lux levels required for LED lighting in high-ceiling warehouses.
200W LED high bays for high-ceiling premises
Above 12 metres of warehouse mounting height, the 200W Samsung chip LED high bay delivers the necessary luminous output in lumens. The 100W 200lm/W LED highbay handles intermediate heights. For large surfaces, the warehouse LED high bay multipack with 200W and a reflector offers the best luminous performance per light point.
Chip and driver quality in industrial high bays
The chip and driver determine the real efficiency and service life in hours. The light colour and luminous intensity depend on the quality of the light source.
Samsung 2835 chip: proven efficiency and durability
The Samsung 2835 chip maintains more than 80% of its initial output after 50,000 hours. It operates at a colour temperature of 5000K. Its degradation curve remains very stable throughout its service life.
Osram and Lumileds chips: premium guarantee
Samsung, Osram, and Lumileds chips are the three references that the B2B market demands as a guarantee of luminous efficacy and light colour stability. The Osram UFO LED high bay maintains consistent luminous performance in continuous use. The CCT industrial LED high bay allows the 5000K colour temperature or other options to be selected according to the production process.
Philips Xitanium dimmable driver
The Philips driver dimmable LED high bay incorporates the Philips Xitanium driver, compatible with 1-10V and DALI dimming. It integrates the dimmable industrial LED high bay into systems that harness natural light by automatically adjusting luminous intensity. Power factors exceed 0.95 across all ranges.
Installation and accessories for LED high bays
Reflectors and beam angles
The LED high bay with reflector concentrates luminous output in lumens, increasing luminous intensity at the work surface. Without a reflector, a 90-120° angle is sufficient up to 10 metres. Above 14 metres, a reflector is essential.
Suspension and fixing systems
UFO high bays accept direct fixing, suspension cable, or rigid rod. Adjustable suspension systems allow the warehouse mounting height to be set once the luminaire is in place.
Sectors where LED high bays make the difference
Logistics and distribution centres
LED logistics lighting demands photometric uniformity in racking aisles between 8 and 14 metres. The 150W UFO industrial LED high bay with IP65 protection rating and DALI dimming is the most widely used combination. The warehouse LED high bay multipack for projects of more than 20 units reduces the cost per light point.
Food industry and production
In the food industry, an IP65 protection rating is a non-negotiable requirement. The IP65 UFO LED high bay is resistant to dust and water, including water jets during cleaning. The 5000K colour temperature supports visual inspection and visual comfort in this environment.
Workshops and manufacturing
The industrial LED luminaire for high ceilings must withstand vibrations and temperature variations in production environments. Dust-resistant models with IP65 protection rating preserve luminous performance throughout the service life. The dimmable industrial LED high bay with a Philips Xitanium driver adapts luminous intensity to each shift and harnesses natural light in spaces with rooflights.
Frequently asked questions about industrial LED high bays
What is the minimum height for installing an industrial LED high bay?
The recommended minimum height is 5 metres. Below that, the UFO optic angle causes direct glare and compromises visual comfort.
What wattage do I need for a 10-metre-high warehouse?
Between 100W and 150W per light point. The 150W UFO industrial LED high bay at 200lm/W efficiency covers between 60 and 80 m² per unit.
Can UFO LED high bays be dimmed?
Yes. The dimmable industrial LED high bay with 1-10V and DALI dimming adjusts luminous output in lumens continuously. The Philips driver dimmable LED high bay is the most common reference.
What is the difference between a Samsung and an Osram chip in high bays?
The Samsung 2835 chip balances luminous efficacy and cost in high-volume projects. The Osram chip offers greater thermal tolerance and a more contained degradation curve over very extended service life in hours.
How much is saved by replacing discharge high bays with LED?
Replacing high-pressure discharge lamps with high-output LED luminaires reduces consumption by between 50% and 70%. The saving on industrial LED lighting operating costs, combined with the elimination of corrective maintenance, allows an ROI of between 12 and 18 months.
Do LED high bays work in dusty or humid environments?
Yes, provided the model has an IP65 protection rating. The IP65 UFO LED high bay is resistant to dust and water, including direct water jets. It is suitable for production warehouses, storage facilities, and food industry spaces.