EVO PRO Series LED Floodlights: Field-Selectable CCT and Lumileds Chip for Outdoor Use

The EVOLUTION LED floodlight, in its EVO PRO version, features a Lumileds chip and colour temperature that can be selected on the fitting itself, so an installer who does not yet know whether the client will want 4000K or 5700K can take a single reference and decide on site, and the series is available in 50W, 100W and 200W, always with IP65 protection and an aluminium body.

What sets the EVO PRO series apart from a standard floodlight

A standard floodlight leaves the factory with a fixed colour temperature, so if the result is not right it has to be removed and another reference ordered, whereas the EVO PRO solves that problem with a built-in selector and a branded chip that maintains luminous flux for longer.

Selectable CCT without removing the installed floodlight

Field-selectable CCT lets you choose between 3000K, 4000K and 5700K, and this on-site selectable colour temperature avoids stocking three different references for each wattage. A CCT selectable EVOLUTION LED floodlight works equally well for a façade with warm light and for a loading bay with cool light, since 5700K is the tone closest to natural daylight.

That is why the EVOLUTION CCT outdoor floodlight suits projects where the client changes their mind during the works, and also phased refurbishments, because it allows the colour temperature to be matched to the luminaires already installed.

Lumileds chip and real efficiency in outdoor conditions

The high-efficiency Lumileds chip is the light source of the series, as the EVO PRO Lumileds LED floodlight uses SMD 2835 LEDs from this manufacturer, and the 200W model reaches 145 lm/W, above the 140 lm per watt efficiency usually required in industrial projects.

The EVOLUTION floodlight lm per watt figure matters because it determines consumption throughout the life of the installation, while the Lumileds chip service life also relies on an aluminium body that dissipates heat, and every EVO PRO IP65 outdoor floodlight offers IP65 outdoor resistance against rain, dust and water jets across the whole range.

EVOLUTION LED floodlight wattages and recommended applications

The wattage depends on the surface to be lit and the height at which the floodlight is mounted, because the higher the mounting, the more watts are needed for the light to reach the ground.

50W, 100W and 200W for every type of outdoor space

The 50W EVO PRO LED floodlight covers accesses, courtyards and low façades, while the 100W EVO PRO LED floodlight is the most versatile model in the series. As an EVOLUTION LED floodlight for outdoor warehouses it lights medium-height façades, and as an EVO PRO floodlight for industrial façades it highlights the volume of the building with even distribution.

The 200W EVOLUTION floodlight is designed for large surfaces, so a 200W EVOLUTION LED floodlight for industrial estates lights roads and manoeuvring areas with fewer light points, and the wide-angle EVOLUTION LED floodlight spreads the beam over broad surfaces with a wide beam angle that reduces shadows between neighbouring fittings.

Installation and dimming options

Wall or extendable bracket installation is done with the adjustable bracket supplied with each floodlight, which screws directly to the wall and, on poles or corners, can be combined with an extendable bracket to move the floodlight away and improve distribution. Every certified EVO PRO floodlight carries the CE mark, and this EVO floodlight CE certification is what site managers require.

1-10V dimming for projects with intensity control

The optional 1-10V dimming depends on the driver, because standard models work on and off. If you need a dimmable EVO PRO LED floodlight, confirm on the technical sheet that the driver accepts the 1-10V signal, since this function cannot be added after installation.

Complete the project with the outdoor floodlight accessories or compare with the AVANT series with Osram chip. To check the EVOLUTION LED floodlight price, each product sheet shows the unit price.

Frequently asked questions about EVO PRO series LED floodlights

What does selectable CCT mean on an outdoor LED floodlight?

It means the floodlight lets you choose the colour temperature using a selector, which on the EVO PRO offers 3000K, 4000K and 5700K, so the same reference works for warm, neutral or cool light.

Can I change the colour temperature of the EVO PRO once it is installed?

Yes, simply switch off the power and move the selector to the desired position, without having to remove the floodlight from its bracket, which lets you adjust the tone after seeing the real result on the façade.

What is the real luminous efficiency of the EVO PRO series?

The 200W model reaches 145 lm/W with a Lumileds SMD 2835 chip, a high-performance figure for a floodlight with selectable colour temperature, and the exact flux of each wattage appears on its technical sheet.

Does the Lumileds chip guarantee greater durability outdoors?

A branded chip has measured degradation and more consistent manufacturing than a generic one, although durability also depends on heat dissipation, and the aluminium body of the EVO PRO keeps the chip at a stable temperature that extends its real service life.

Are EVO PRO floodlights dimmable with a 1-10V system?

Standard versions do not include a dimming input, because for 1-10V control the driver has to support it from the factory, so you should confirm it on the technical sheet before placing the order.

What is the difference between the AVANT series and the EVO PRO series?

The AVANT series uses an Osram Duris chip and covers 10W to 200W, with IK10 vandal-resistant models, while the EVO PRO series uses a Lumileds chip and offers selectable CCT on all its wattages. AVANT prioritises the variety of wattages and EVO PRO the flexibility of colour temperature.