AVANT Series LED Floodlights: Osram Chip and IP65 Certification for Professional Outdoor Use

The AVANT LED floodlight is Icilux's outdoor series with an Osram Duris E2835 chip, available from 10W to 200W with an IP65 protection rating, aluminium body and adjustable bracket, and it is designed for façades, warehouses, industrial estates and car parks, where maintaining the lighting installation carries a significant cost.

Why the AVANT series is the benchmark in professional outdoor floodlighting

Many generic floodlights do not state which LEDs they use, whereas in the AVANT series the chip is identified and this makes it possible to compare real luminous flux and lifespan data, which is key in professional LED lighting because LED technology allows consumption and maintenance to be calculated precisely.

Every AVANT IP65 LED floodlight offers IP65 outdoor resistance against rain and dust, and several models add IK10 impact resistance. The aluminium housing works as a heat sink, and this outdoor heat dissipation keeps the chip temperature stable all year round.

Osram Duris chip, real efficiency and guaranteed service life

Osram and Lumileds chip quality is the basis of the series as a light source, although the current range uses Osram Duris E2835, so anyone looking for an AVANT Lumileds outdoor floodlight will find the same format and the same resistance with an Osram chip. In terms of energy efficiency, the lm per watt efficiency ranges from 120 lm/W in the 200W model with selectable colour temperature to 140 lm/W in the 150W model, and the 3CCT model with SOSEN driver reaches 160 lm/W.

The declared service life of the 200W outdoor floodlight is 30,000 hours, with CRI 80, and the warranty ranges from 3 to 5 years depending on the reference, which in industrial buildings means fewer replacements and less work at height.

AVANT LED floodlight wattages and when to use each one

The wattage is chosen according to the surface to be covered and the mounting height, because the higher the fitting, the more watts are needed for the light to reach the ground.

50W for accesses and gardens, 100W for warehouses and industrial estates, 200W for large spaces

The 50W AVANT LED floodlight lights accesses, courtyards and gardens without glare, and when the project needs to adjust the colour temperature, the AVANT 50W CCT floodlight from 50 to 100W lets you select wattage and colour temperature on the fitting.

The 100W AVANT LED outdoor floodlight is the intermediate lighting solution for warehouses and industrial estates, since as an AVANT floodlight for outdoor warehouses it lights medium-height façades and loading bays, while as an AVANT LED floodlight for industrial estates it covers internal roads and manoeuvring areas.

The 200W AVANT floodlight with Osram chip is intended for large surfaces and, regarding the difference between the AVANT 100W and 200W floodlights, the 200W model doubles the flux and allows fewer light points to be installed, in exchange for more weight on the bracket, so a 200W AVANT LED floodlight for car parks mounted on a pole covers several spaces from a single point.

Installation and compatibility with outdoor brackets

Models with selectable colour temperature offer 3000K, 4000K and 5700K, so anyone looking for a neutral 5000K colour temperature will find in 5700K, a cool white, the closest alternative. Every certified AVANT outdoor LED floodlight carries the CE mark, and this CE certification is what site managers require.

Wall, pole and extendable bracket mounting

Wall, pole or bracket installation is done with the adjustable bracket supplied with each floodlight. On a pole or arm, this same bracket allows the beam tilt to be adjusted, and an AVANT LED floodlight for façades is aimed from the bottom upwards without glare.

The AVANT LED floodlight beam angle is a wide beam, designed to wash large surfaces, and the available beam angle is shown on the technical sheet for each wattage. As for dimming, the optional AVANT dimming depends on the driver, so if you need a dimmable AVANT outdoor floodlight you should confirm it on the sheet before ordering.

Add outdoor floodlight accessories such as extendable brackets, or compare with the EVOLUTION series with selectable CCT. To compare the AVANT LED floodlight price, each product sheet shows the amount.

Frequently asked questions about AVANT series LED floodlights

Which AVANT wattage do I need to light a warehouse façade?

For a façade 6 to 8 metres high, the usual choice is to install the 100W model every few metres, although if the façade is over 10 metres high or is lit from a distance, the 150W or 200W model is advisable.

Are AVANT floodlights dimmable?

Standard models work on and off, since dimming depends on the driver and is stated on the sheet for each reference. If the project's electrical installation requires dimming, check it before ordering.

Does the Osram Duris chip guarantee a longer service life than generic chips?

A branded chip has measured degradation and more consistent manufacturing, which is why the AVANT series publishes a service life of 30,000 hours for its 200W model and up to 5 years' warranty depending on the reference, data that generic chips do not usually publish.

What beam angle do AVANT floodlights have?

They are wide-beam floodlights, designed to wash façades and large surfaces evenly. The exact figure for each wattage appears on its technical sheet, and the bracket allows the tilt to be corrected on site.

Do AVANT floodlights withstand rain and extreme temperatures with IP65?

Yes, because their IP protection of grade 65 prevents the ingress of dust and water jets, while the aluminium housing dissipates heat in summer, and the IK10 models also withstand knocks and vandalism.

Can I install a 200W AVANT on a standard pole?

Yes, as long as the pole and arm can bear the weight of the floodlight and the surface exposed to the wind. The bracket is bolted to a crossarm or pole bracket, so you should check the dimensions and weight on the sheet before choosing the support.