Outdoor LED Floodlight Accessories: Brackets, Joining Pieces and Mounting Kits
Outdoor LED floodlight accessories are part of the LED lighting system from day one. Without a suitable bracket, the floodlight cannot be placed at the height, distance and orientation required by the lighting calculation, and part of the light is lost.
Why the right bracket defines the result of your outdoor installation
An LED floodlight performs according to its position. An error of a few centimetres in the offset or a few degrees in the tilt causes shadows, glare or dark areas, even if the floodlight has a high luminous flux. That is why every LED floodlight mounting accessory should be chosen together with the floodlight and not at the end of the job.
Angle, height and orientation are impossible without the right bracket
The standard yoke lets you tilt the floodlight, but not move it away from the wall or raise it above a cornice. A floodlight arm bracket provides the height adjustment that the yoke does not offer. This way the beam reaches façades, roads or loading areas with uniform lighting and without shadows from the building itself.
The bracket does not change the colour temperature or the energy efficiency of the floodlight, but it does decide where each lumen falls. With the beam angle properly used, outdoor lighting needs fewer light points.
Types of outdoor LED floodlight accessories and when to use each one
The choice depends on the mounting surface, the weight of the assembly and the adjustment range required. The range covers wall, pole and floor fixing, and each option suits a specific type of installation.
60 to 105cm extendable bracket, wall bracket and side joining piece
The extendable outdoor LED floodlight bracket is the one installers search for most, because a single model solves different offsets. As an adjustable 60 to 105cm LED floodlight bracket, it works like a telescopic outdoor floodlight bracket. This adjustable extendable bracket lets you adjust the position on site without changing the part.
The 100cm LED floodlight wall bracket is a fixed steel arm that holds the floodlight one metre away from the wall, enough to clear eaves. As an LED floodlight wall bracket it is common on façades, and as an LED floodlight bracket for warehouses it lights loading bays from the cladding.
The LED floodlight pole bracket is bolted to the top of the pole and accepts one, two or three adjustable outlets. It is the LED floodlight bracket most used on industrial estates for roads and car parks. Finally, the side joining piece for Magnum floodlights groups several bodies in a row, and a joining piece for multiple floodlights forms compact high-power blocks.
| Accessory | Fixing | Adjustment range | Typical use |
| Extendable bracket | Wall | 60 to 105 cm | Façades with eaves |
| Wall arm bracket | Wall | 100 cm fixed | Warehouses, yards and fences |
| Pole bracket | Post or pole | 1, 2 or 3 outlets | Industrial estates and car parks |
| Side joining piece | Between floodlights | Several bodies in a row | Stadiums and towers |
Compatibility with Magnum, AVANT and EVO series floodlights
Wall, extendable and pole brackets hold the floodlight by its yoke. They are therefore suitable for any model in the AVANT, EVO PRO and Magnum series, provided that the yoke bolt and the weight of the assembly are within the values shown on the sheet. Compatibility with Magnum series floodlights is complete for the side joining piece, designed for the modular body of that family.
All of them are fixed with bolts, so installation without welding is quick and reversible. As for the outdoor-resistant steel material, it is advisable to choose an anti-corrosion galvanised finish and check the treatment on each sheet, because the lifespan of the bracket depends on it.
A complete outdoor floodlight fixing kit includes the bracket, plugs or clamps and electrical components. The IP outdoor floodlight fixing kit adds IP68 waterproof connectors to protect the cable joint, resulting in a safe installation against rain.
As for the outdoor floodlight accessory price, each sheet shows the unit price. It is a low-cost, essential accessory compared with the value of the floodlight it holds. In sports projects, the most requested LED stadium floodlight accessory is the joining piece, and to choose the outdoor LED floodlight it is worth checking the AVANT series LED floodlights and the EVO PRO series LED floodlights.
Frequently asked questions about outdoor LED floodlight accessories
What is an extendable bracket for on an outdoor LED floodlight?
It is used to hold the floodlight away from the wall at the exact distance each installation needs, between 60 and 105 cm. This way eaves and cornices are cleared without changing bracket.
Is the 100cm wall bracket compatible with all floodlights?
It is compatible with floodlights fixed by a yoke, which includes the AVANT, EVO PRO and Magnum series. Before mounting it, check that the weight of the floodlight does not exceed the permitted load.
What is the side joining piece for Magnum floodlights?
It is an accessory that bolts two bodies of the modular Magnum system together at the side and keeps them aligned as a single block. It lets you add wattage using a single bracket.
Can I install an LED floodlight on a pole without a specific bracket?
It is not recommended, because the yoke is designed for flat surfaces and not for the top of a pole. The pole bracket adapts to the tube diameter and lets you aim up to three floodlights.
Are the brackets resistant to corrosion outdoors?
They are made of steel prepared for outdoor use, and their durability depends on the finish of each reference. In coastal areas it is advisable to choose a galvanised finish and check the bolts from time to time.
How many floodlights can I join with the side joining piece?
Each piece joins two bodies, and by combining several you can form rows of three, four or more floodlights. The limit is set by the load the structure can take, so it is worth calculating the wattage needed to light the area before mounting the row.