ATEX LED emergency light maintained 3W 200lm IP65
Secure evacuation in explosive zones with the ATEX LED emergency light maintained 3W. 200 lm, IP65 and 2h autonomy. Certified for zones 1, 2, 21 and 22. Buy now at Icilux.
The ATEX LED emergency light maintained 3W stays lit at all times and holds 200 lm for 2 hours if the power fails, with IP65 protection and certification for zones 1, 2, 21 and 22.
Benefits of the ATEX LED Maintained Emergency Light 3W
- ATEX, CE and RoHS certification for zones 1, 2, 21 and 22.
- Maintained operation with 2h autonomy.
- 200 lm with SMD LED at 6500K.
- IP65 protection against dust and water.
- Aluminium and tempered glass.
Where to install the ATEX LED Maintained Emergency Light 3W
Ideal for refineries, chemical plants, warehouses, process rooms and escape routes in classified zones.
Technology and performance of the ATEX LED Maintained Emergency Light 3W
In maintained mode it lights continuously and switches to battery on its own when the supply drops. It runs on 180-240V with a 0.95 power factor, a 120° beam and a 50,000 hour lifespan, from -20°C to +40°C.
Installation of the ATEX LED Maintained Emergency Light 3W
It mounts on a wall or ceiling through cable glands, with a 7 mm minimum cable not included. Installation by qualified staff; switch off the power and check the seal before handling it.
Icilux distributes it in Spain with warranty and technical support; shipping in 24-48h subject to availability.
Frequently asked questions
What does maintained mean? — It stays lit and switches to battery if the power fails.
How long does the battery last? — 2 hours in emergency mode.
Is the cable included? — No, it needs a cable of at least 7 mm diameter.